Special or made-to-order product — Lead times may vary based on manufacturing. Please note it is non-returnable. Contact us with any questions!
Questions? Contact us
Financing available
Satisfied or refunded
Secure payments
Mail itPrint itTechnical Specifications
Product Description
The HSURC and HSULC are 45°-skewed hangers designed to support 2x and 4x members in wood construction. These heavy U-shaped hangers feature concealed header flanges providing cleaner visible lines in exposed conditions. These are identical except that they are skewed 45° to the right (HSURC) and the left (HSULC), respectively.
Key Features
- A2 (acute) flange turned in to accommodate end-of-wall installation
- Encapsulates the top flange of the joist, so no web stiffeners are required for standard installation
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40°- to 50°-skewed joist
Installation:
- Fasteners required. 9 x 2-1/2″ Strong-Drive SD Connector screws OR 0.162″ x 3-1/2″ Nails & 0.162″ x 2-1/2″ Nails
- The joist end may be square cut or bevel cut.
- Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity.
This item is Special ordered or Made to Order by Simpson Strong-Tie, it is non-refundable with varied lead times. Please verify that all configurations / specifications are correct before checking out.
Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.
Download Specs Sheet: SUR-SUL-HSUR-HSUL.pdf
