MH-0075-0M11
The portable kerosene forced air heaters provide dependable heat for large areas. They feature built-in temperature control and sure start ignition.
MotorHeavy-duty, cast aluminum enclosed electric motor
Burner HeadOne-piece cast aluminum
ComponentsEasy assembly · Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Flat-free tires
Factory Tested for Multiple FuelsKerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel · Not approved for bio-fuel
Important Notes-Not for use in residential living areas or inadequately ventilated areas-Proper ventilation required during operation-Must be plugged into an approved standard electrical outlet for operation
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications
-
Heat Output
75,000 BTU
-
Hot-Air Flow
173 CFM
-
Air Pump Pressure
5.5 PSI
-
AC Power
120V, 60Hz, 1.3 Amps
-
Motor Size
1/5 HP
-
Fuel Tank Capacity
5.3 gallons
-
Fuel Consumption
0.55 gal./hr.
-
Max. Operating Hours
9.5 hours
-
Heating Area
1,875 sq. ft.
-
Multi-Fuel Capable
Yes
-
Digital Temp. Read-Out
Yes
-
Error Indicator Read-Out
Yes
